YNW 5-15ac 5GHz 802.11ac 2×2 MIMO PTP/PTMP Outdoor Wireless Bridge
YNW 5-15ac 5GHz 802.11ac outdoor wireless bridge with integrated 15dBi dual-polarized directional panel antenna, 2x2 MIMO, 500+ Mbps throughput, iPoll 3 protocol, IP65 rated, PTP up to 7km, PTMP up to 5km. Ideal for short-range PtP and PtMP deployments.
YNW 5-15ac — 5GHz 802.11ac Outdoor Wireless Bridge
Product Overview
The YNW 5-15ac is a 5GHz 802.11ac outdoor wireless bridge built on the QCA 9563 + QCA 9882 chipset platform. Featuring an integrated 15 dBi dual-polarized directional panel antenna, it delivers an aggregate throughput of over 500 Mbps. With a recommended PtP range of 7 km and PtMP range of 5 km, and weighing only 185 g, it is purpose-built for short-to-medium range PtP/PtMP deployments and CPE client applications.
Key Highlights
Core Advantage: 15 dBi integrated antenna + iPoll 3 protocol + ultra-light 185 g design. Supports 7 km in PtP mode and 5 km in PtMP mode. The 35° beamwidth offers more forgiving alignment tolerance compared to higher-gain narrow-beam antennas, making it ideal for quick deployment by less experienced installation teams.
Typical Applications: WISP CPE devices, short-to-medium range video surveillance backhaul, temporary rapid network setup, and SME network bridging.
Memory: 64 MB RAM / 16 MB Flash
WiFi Standard: 802.11a/n/ac
Interface: Gigabit RJ45 PoE Input
Antenna Gain: 15 dBi (35°×35°)
Technical Specifications
The following are the complete technical specifications for the YNW 5-15ac, sourced from the official datasheet and measured under typical 25°C test conditions.
| Parameter | Specification |
|---|---|
| Wireless Standard | IEEE 802.11a/n/ac, iPoll 3 |
| Operating Frequency | 5.150 – 5.850 GHz (FCC: 5.150–5.250, 5.725–5.850 GHz) |
| MIMO Configuration | Dual-chain 2×2 MIMO |
| Channel Bandwidth | 5, 10, 20, 40, 80 MHz |
| Modulation | 802.11a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK) 802.11ac: OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK) |
| Transmit Power | Up to +30 dBm (subject to country regulations) |
| Max Throughput | 500+ Mbps (aggregate) |
| Recommended Range | PtMP: 5 km (3.11 mi) / PtP: 7 km (4.35 mi) |
| Antenna Type | Integrated dual-polarized directional panel antenna |
| Antenna Gain | 15 dBi |
| Polarization | Dual-linear |
| Cross-Pol Isolation | ≥21 dB |
| VSWR | <1.4 |
| Horizontal Beamwidth | 35° (H and V polarization) |
| Vertical Beamwidth | 35° |
| Interface | 10/100/1000 Base-T, RJ45 (Passive PoE 24V) |
| Power Supply | 24 VDC Passive PoE (AC to 24 VDC adapter included) |
| Max Power Consumption | 10 W |
| Memory | 64 MB RAM / 16 MB Flash |
| Ingress Protection | IP65 |
| Surge Protection | 3 kV line-to-ground / 1 kV line-to-line |
| Operating Temperature | -40°C to +65°C (-40°F to +149°F) |
| Humidity | 0–90% (non-condensing) |
| Dimensions | 158 × 97 × 38 mm |
| Weight | 185 g (0.4 lb) |
| Mounting | Pole mount, bracket included |
| Compatibility | Backward compatible with previous generation YNW iPoll devices |
Key Features
15 dBi Integrated Antenna
The 35° beamwidth provides an excellent balance between gain and alignment ease. Compared to narrow-beam antennas with sub-20° beamwidth, the 15 dBi’s 35° beam allows greater installation tolerance, reducing on-site alignment time.
500+ Mbps Throughput
With 2×2 MIMO + 80 MHz channel width + 256-QAM, the theoretical PHY rate reaches 866 Mbps, delivering an aggregate real throughput of 500+ Mbps. The Gigabit Ethernet port ensures no wired-side bottleneck.
iPoll 3 Proprietary Protocol
iPoll 3 optimizes scheduling for PtMP environments, effectively reducing latency jitter under multi-client concurrent access and improving uplink utilization.
Ultra-Light 185 g Design
With a metal-free structure weighing only 185 g, this is one of the lightest models in the ac series. The compact packaging also reduces shipping costs. Ideal for mounting points with weight restrictions.
Integrated Surge Protection
3 kV line-to-ground / 1 kV line-to-line surge protection reduces the risk of equipment damage in lightning-prone areas and unstable power supply environments.
Hotspot Mode Support
After upgrading to Infinity firmware, the device can switch to outdoor hotspot AP mode for WiFi coverage scenarios. A single unit serves both bridge and AP functions, improving inventory flexibility.
IP65 Ingress Protection
The enclosure achieves IP65 protection rating, capable of withstanding heavy rain and dust ingress, suitable for long-term outdoor pole or wall-mount operation.
Infinity Controller Management
Supports Infinity Controller platform for bulk device discovery, auto-configuration, topology visualization, and remote firmware upgrade. Ideal for network operators managing large device fleets centrally.
Model Lineup
YNW ac Series 5GHz product selection reference.
| Model | Antenna Type | Antenna Gain | Coverage/Range | Best For |
|---|---|---|---|---|
| YNW 5-90ac | Integrated Sector | 18 dBi (90°) | 5 km coverage | PtMP Base Station |
| YNW 5-20ac | Integrated Directional | 20 dBi | PtP 15 km / PtMP 10 km | PtP & PtMP Mid Range |
| YNW 5-15ac | Integrated Directional | 15 dBi | PtP 7 km / PtMP 5 km | PtP & PtMP Short Range |
| YNW 5ac | N-Type Connector (External) | Depends on external antenna | PtP 20 km (antenna dependent) | PtP & PtMP Flexible Networking |
Target Applications
- WISP CPE: Serves as a client device in PtMP networks connecting to a 5-90ac base station. The 15 dBi antenna provides sufficient uplink budget within 3–5 km range, while the 35° beamwidth reduces base station alignment difficulty during field installation.
- Short-to-Medium Range Video Surveillance Backhaul: Transmits video streams from front-end cameras to the monitoring center via the 5-15ac. Within 2–3 km, the 80 MHz channel delivers 300+ Mbps real throughput, supporting multi-channel HD video transmission.
- Temporary Rapid Network Deployment: For events, sports venues, emergency command, and other scenarios requiring fast network setup. The 185 g weight and compact size facilitate transport and rapid installation, with a single PoE cable handling both power and data.
- SME Network Bridging: Connects two office locations 1–3 km apart, replacing leased fiber or dedicated lines. With 500+ Mbps real throughput, it supports video conferencing, file sharing, cloud services, and other enterprise applications.
Product Comparison
Key differences across YNW ac Series 5GHz models.
| Parameter | YNW 5-15ac | YNW 5-20ac | YNW 5-90ac | YNW 5ac | YNW 5-23ac |
|---|---|---|---|---|---|
| Antenna Gain | 15 dBi | 20 dBi | 18 dBi (sector) | External (N-type) | 23 dBi |
| PtMP Range | 5 km | 10 km | 5 km | Antenna-dependent | 12 km |
| PtP Range | 7 km | 15 km | — | ≤20 km | 20 km |
| Beamwidth | 35° | 16° | 90°×20° | Antenna-dependent | 6°×9° |
| Weight | 185 g | 413 g | 460 g | 450 g | 3.3 kg |
Ordering Information
| Model | Description | Temperature Range | Order Code |
|---|---|---|---|
| YNW 5-15ac | 5GHz 802.11ac, 15dBi integrated antenna, PtP/PtMP | -40°C to +65°C | YNW-5-15AC-001 |
Frequently Asked Questions
Q: How do I choose between YNW 5-15ac and YNW 5-20ac?
The core difference lies in antenna gain and range. The YNW 5-15ac offers 15 dBi gain with a 35° beamwidth, rated for PtP 7 km / PtMP 5 km, weighing 185 g. The YNW 5-20ac delivers 20 dBi gain with a 16° beamwidth, rated for PtP 15 km / PtMP 10 km, weighing 413 g. If your link distance is within 5 km and you prioritize ease of alignment, choose the 5-15ac. For links exceeding 5 km or when higher link margin is required, select the 5-20ac.
Q: Is the 185 g ultra-light enclosure reliable in high-wind environments?
Despite weighing only 185 g, the YNW 5-15ac enclosure material and structure have been wind-tunnel validated. When installed with the included pole-mount bracket, it remains stable under 160 km/h wind speeds. The compact form factor also reduces wind loading.
Q: What accessories are included in the package?
The package includes the YNW 5-15ac unit, a 24V passive PoE injector (AC 100–240V input), and a pole-mount installation bracket. No additional purchases are needed for installation and power supply.
Q: Does it support switching between iPoll and standard 802.11 modes?
Yes. The YNW 5-15ac supports both the iPoll 3 proprietary protocol mode and standard 802.11a/n/ac modes. iPoll mode is recommended in PtMP environments for optimal multi-user performance. Standard 802.11 mode can be used when compatibility with standard WiFi clients is needed.
Q: Does YNW 5-15ac support OEM/white-label customization?
Yes. The YNW 5-15ac offers complete OEM customization services, including brand logo and product label customization, web management UI skinning, firmware pre-configuration (channel plan, power limits, management IP, etc.), and branded packaging and accessories. OEM projects can have all Zukaka branding fully removed from the firmware for a pure white-label experience. Integration with third-party NMS/OSS platforms via SNMP and REST API is also supported.
Q: What is the MOQ for OEM YNW 5-15ac?
Basic brand customization (logo + packaging) has a minimum order quantity of 100 units. Deep firmware customization (UI skinning, pre-configured parameters) requires a MOQ of 200 units. Full ODM (including hardware/PCB revisions) requires a MOQ of 1,000+ units. Volume pricing scales with quantity, with significant discounts available at the 1,000-unit level.
