5GHz High-Power 802.11ac MiniPCIe WiFi Module WLE600V5-27ESD

QCA9882 WiFi 5 (802.11ac Wave 1) 2×2 MIMO Single Band Module

Qualcomm-Atheros QCA9882 ‘Peregrine’ series
Mini PCIe 1.1 WLAN host interface
2x MMCX connectors
BPSK, QPSK, DBPSK, DQPSK, 16-QAM, 64-QAM, 256-QAM of modulation techniques
-20°C to 70°C operating temperature
50.0 mm × 51.0 mm × 12.5 mm (W x H x D)

2×2 5G30dBm867MpbsMiniPCle

WLE600V5-27ESD – 5GHz High-Power 802.11ac MiniPCIe WiFi Module

Industrial Grade

Product Overview

This industrial-grade 5GHz WiFi module delivers IEEE 802.11a/n/ac wireless protocol with high-power RF design and 2×2 MIMO technology. It provides stable high-speed wireless transmission for enterprise, industrial IoT, outdoor wireless bridging and embedded applications, with global regulatory certifications for long-distance stable communication.

Key Overview

Target Users：Enterprise wireless AP manufacturers, industrial IoT integrators, outdoor wireless bridge installers, embedded OEM device builders

Core Strengths：27dBm per chain high-power output, 2×2 MIMO with up to 867Mbps, industrial-grade ESD protection, global FCC/CE/IC certifications

Typical Applications：Enterprise wireless APs, point-to-point wireless bridges, industrial IoT gateways, outdoor routers, embedded OEM devices

Chipset：Qualcomm
WiFi Standard：802.11a/n/ac
Interface：MiniPCIe

Technical Specifications

Complete wireless performance and power specifications for the WLE600V5-27ESD module.

Parameter	Specification
Wireless Standard	IEEE 802.11a/n/ac
Frequency Range	5.150 ~ 5.825GHz (Global 5GHz bands)
MIMO Configuration	2×2 MIMO
Max Data Rate	867Mbps (80MHz channel)
Channel Bandwidth	20/40/80MHz (Adaptive)
TX Power	27dBm per chain (Typical)
Antenna Connectors	2x MMCX

TX/RX Performance (5GHz)

Data Rate	TX Power (dBm)	RX Sensitivity (dBm)
6Mbps	30	-94
54Mbps	26	-80
MCS 0	29	-89
MCS 7	24	-72
MCS 9	22	-68

Power Specifications

Parameter	Specification
Operating Voltage	3.3V / 5V (Dual voltage support)
Power Consumption	7.5W (Max, Typical)

Key Features

High-Power RF Design

27dBm per chain output delivers significantly extended wireless range and better wall/floor penetration compared to standard modules.

2×2 MIMO + 80MHz

Delivers up to 867Mbps throughput—enough headroom for 4K video streaming, large file transfers, and bandwidth-intensive industrial applications.

Industrial ESD Protection

Built-in ESD protection circuitry handles the harsh electrical transients common in outdoor and industrial environments.

Global Certifications

FCC (USA), CE RED (EU), IC (Canada), and REACH compliance means faster regulatory approval in major markets.

Dual-Voltage Compatibility

3.3V and 5V operation covers most embedded system designs without extra power conditioning circuitry.

MiniPCIe Form Factor

Standard 52-pin MiniPCIe connector ensures drop-in compatibility with existing embedded platforms and carrier boards.

Target Applications

Enterprise wireless access points
Point-to-point and point-to-multipoint wireless bridges
Industrial IoT gateways and controllers
Outdoor routers and WiFi coverage systems
Embedded OEM devices requiring 5GHz wireless

Certifications

Region	Certifications
USA	FCC Certification, REACH Compliance
European Union	CE RED Certification, RoHS Compliance
Canada	IC Certification

Frequently Asked Questions

Q: What is the maximum transmission range?

Range depends on antenna gain, mounting height, and obstacles. With standard antennas, you can expect several hundred meters in urban environments and several kilometers with high-gain directional antennas at elevated positions.

Q: Can this module work with both 3.3V and 5V systems?

Yes, the module supports dual-voltage operation (3.3V/5V), making it compatible with a wide range of embedded platforms without requiring additional voltage regulation.

Q: What antenna connectors does it use?

The module uses 2x MMCX antenna connectors. MMCX-to-SMA or MMCX-to-N-Type adapters are commonly available for connecting various antenna types.

Q: Is this module suitable for outdoor use?

The module itself is designed for indoor/embedded use. For outdoor deployments, it should be housed in a proper enclosures with environmental protection. The module’s built-in ESD protection helps withstand transient events.

Q: Does it support mesh networking?

The module hardware supports standard 802.11 protocols. Mesh networking capability depends on the host system’s software implementation (e.g., 802.11s, BATMAN, or custom mesh protocols running on OpenWrt/Linux).