YNW 5-20ax 5GHz 802.11ax wireless backhaul IP67 PTP and PTMP Outdoor Wireless Bridge
YNW 5-20ax 5GHz 802.11ax outdoor wireless bridge with integrated 20dBi antenna, 2x2 MIMO, up to 1500 Mbps throughput, 2.5G PoE IN and PoE OUT ports, IP67 rated for PTP and PTMP deployments up to 10km. Wi-Fi 6 for high-capacity backhaul
YNW 5-20ax 5GHz 802.11ax Outdoor Wireless Bridge
Product Overview
The YNW 5-20ax is the 802.11ax (WiFi 6) standard 5GHz outdoor wireless bridge from Zukaka, featuring an integrated 20 dBi high-gain antenna. With an aggregate throughput exceeding 1500 Mbps and a maximum communication distance of 10 km, it is designed for medium-to-short range PtP and PtMP deployment scenarios.
Key Highlights
Core Advantage: 20 dBi integrated antenna with 802.11ax 160 MHz channel, maintaining 1 Gbps+ real throughput at 2 km typical distance. 2.5G uplink port + PoE OUT peripheral power supply + IP67 protection delivers a cost-effective gigabit wireless bridging solution.
Typical Applications: Campus building gigabit bridging, medium-to-short range video surveillance backhaul, PtMP client access, temporary rapid networking.
WiFi Standard: 802.11a/n/ac/ax
Interface: RJ45 2.5G PoE IN + Gigabit PoE OUT
Antenna Gain: 20 dBi integrated
Technical Specifications
The following are the complete technical specifications for the YNW 5-20ax, sourced from the official datasheet and measured under typical 25°C test conditions.
| Parameter | Specification |
|---|---|
| Wireless Standard | IEEE 802.11a/n/ac/ax |
| Operating Frequency | 5.150 – 5.850 GHz (FCC: 5.150–5.250, 5.725–5.850 GHz) |
| MIMO Configuration | Dual-chain 2×2 MIMO |
| Channel Bandwidth | 20, 40, 80, 160 MHz |
| Modulation | OFDMA/OFDM, 1024-QAM / 256-QAM / 64-QAM / 16-QAM / QPSK / BPSK |
| Transmit Power | Up to +24 dBm (subject to country regulations) |
| Receive Sensitivity | -96 dBm (HE20, MCS0) to -55 dBm (HE160, MCS11) |
| Max Throughput | 1500+ Mbps (aggregate) |
| Antenna Type | Integrated directional panel antenna |
| Antenna Gain | 20 dBi |
| Polarization | Dual-linear |
| Management Radio | Built-in 2.4 GHz single-polarization omni patch antenna (for remote management) |
| Ethernet Port 1 | 100/1000/2500 Base-T, PoE IN (RJ45) |
| Ethernet Port 2 | 10/100/1000 Base-T, PoE OUT (RJ45) |
| Power Supply | 802.3at Active PoE Input (55 VDC) |
| Power Adapter | AC 100–240 V → 55 VDC PoE injector (included) |
| Max Power Consumption | 15 W (without PoE OUT) / 30 W (with PoE OUT) |
| PoE OUT Power | 802.3af/at, 55 VDC, max 13 W |
| Ingress Protection | IP67 |
| Surge Protection | EN61000-4-5, 6kV line-to-ground / 2kV line-to-line, 10/700μs pulse |
| Operating Temperature | -40°C to +65°C (-40°F to +149°F) |
| Humidity | 0–95% (non-condensing) |
| Dimensions (excl. bracket) | 50 × 140 × 185 mm |
| Weight (incl. bracket) | 1.76 kg |
| Recommended Range | Optimal 2 km (1.24 mi) / Max 10 km (6.21 mi) |
| Compatibility | Backward compatible with previous generation 802.11n and 802.11ac devices |
Key Features
20 dBi High-Gain Integrated Antenna
Offers 3–4 dB higher gain than conventional 16–17 dBi antennas. At 2 km typical distance with 80 MHz channel, maintains 800+ Mbps real throughput. The 10 km max range provides a clear advantage over competing products in its class.
802.11ax 160 MHz Channel
WiFi 6 standard brings 40% spectral efficiency improvement. OFDMA technology effectively improves multi-user concurrency in PtMP scenarios. 160 MHz channel bonding delivers 1500+ Mbps aggregate throughput.
2.5G Uplink Port
2.5 Gbps uplink eliminates the wired bottleneck. In PtP bridging scenarios, ensures that the 1500+ Mbps wireless aggregate throughput can be fully delivered to the wired network without performance constraints.
PoE OUT Peripheral Power Supply
The second Ethernet port supports 802.3af/at PoE output, directly powering outdoor cameras or other Zukaka devices. When installed on a tower, a single Ethernet cable handles both data and power.
Metal Shielded Enclosure
The all-metal enclosure doubles as a heat sink, passively cooling the unit across -40°C to +65°C. In multi-device co-location, the metal cavity effectively reduces RF coupling interference.
IP67 Fully Sealed Protection
The corrosion-resistant metal housing achieves IP67 rating for long-term operation in heavy rain, high humidity, salt spray, and dusty environments. Built-in surge protection meets IEC 61000-4-5 standards.
2.4 GHz Independent Management Radio
Built-in 2.4 GHz management radio allows installers and maintenance personnel to configure the device from within 20 meters using a phone or tablet. No additional cabling needed for tower-mounted deployments.
Infinity Controller Cloud Management
Supports Zukaka Infinity Controller platform for bulk device discovery, auto-configuration, topology visualization, and remote firmware upgrades. Ideal for medium-to-large networks with tens to hundreds of devices.
Model Lineup
YNW ax Series 5GHz product selection reference.
| Model | Antenna Type | Antenna Gain | Optimal/Max Range | Best For |
|---|---|---|---|---|
| YNW 5-20ax | Integrated Directional | 20 dBi | 2 km / 10 km | PtP & PtMP Mid Range |
| YNW 5-23ax | Integrated Directional | 23 dBi | 4 km / 15 km | PtP & PtMP Medium-Long Range |
| YNW 5-90ax | Integrated Sector | 17 dBi (90°) | 2 km / 6 km | PtMP Base Station |
| YNW 5ax | N-Type Connector (External) | Depends on external antenna | Antenna-dependent | PtP & PtMP Flexible Networking |
Target Applications
- Campus Building Gigabit Bridging: Connects offices, factories, or warehouses 500 m–2 km apart across a campus. The 2.5G uplink ensures end-to-end transport capacity for multi-service traffic, replacing fiber or leased lines.
- Medium-to-Short Range Video Surveillance Backhaul: Provides wireless backhaul for surveillance in ports, mining areas, or construction sites. PoE OUT directly powers cameras, reducing on-site cabling.
- PtMP Client Access: Pairs with 5-90ax sector base stations as CPE. The 20 dBi antenna gain provides ample uplink link budget for stable base station access within 2 km.
- Temporary Rapid Networking: Events, tournaments, emergency command scenarios requiring fast network deployment. The 2.5G port connects to high-speed Internet for gigabit-level on-site access.
Product Comparison
Key differences between YNW 5-20ax and other 5GHz ax series models.
| Parameter | YNW 5-20ax | YNW 5-23ax | YNW 5-90ax | YNW 5ax |
|---|---|---|---|---|
| Antenna Gain | 20 dBi | 23 dBi | 17 dBi (sector) | External (N-type) |
| Optimal Range | 2 km | 4 km | 2 km | Antenna-dependent |
| Max Range | 10 km | 15 km | 6 km | Antenna-dependent |
| Horizontal Beamwidth | ≈15° | ≈10° | 90° | Antenna-dependent |
| Preferred Topology | PtP / PtMP | PtP / PtMP | PtMP (Base) | PtP / PtMP |
| EIRP (24 dBm TX) | ≈44 dBm | ≈47 dBm | ≈41 dBm | Antenna-dependent |
Ordering Information
| Model | Description | Temperature Range | Order Code |
|---|---|---|---|
| YNW 5-20ax | 5GHz 802.11ax, 20dBi integrated antenna, PtP/PtMP | -40°C to +65°C | YNW-5-20AX-001 |
Frequently Asked Questions
Q: How do I choose between YNW 5-20ax and YNW 5-23ax?
The main differences are antenna gain and range. If the link distance is within 2 km, the 20 dBi antenna of the 5-20ax is sufficient, and the 15° beamwidth is easier to align than the 23 dBi’s 10°. For distances exceeding 2 km or when additional link budget margin is needed, the 5-23ax is recommended.
Q: What is the real throughput at 10 km max distance?
At 10 km maximum distance, a 20 MHz or 40 MHz channel width is recommended for link stability. Real throughput is expected in the 100–200 Mbps range. For high throughput, keep the distance within 2 km using 80/160 MHz channels.
Q: Does the device support VLAN and Q-in-Q?
Yes. Supports 802.1q VLAN with Q-in-Q double-tagging, allowing VLAN pass-through or modification in bridge mode. Suitable for multi-tenant deployments requiring service isolation.
Q: Is a mounting bracket included in the package?
Yes. The package includes the YNW 5-20ax unit, a PoE injector (AC 100–240V to 55 VDC), a mounting bracket, M8 bolts (7 pcs), and installation tools. No additional mounting accessories are needed.
Q: Does YNW 5-20ax support OEM/white-label customization?
Yes. The YNW 5-20ax offers complete OEM customization including brand logo and product label customization, chassis color customization, web management UI skinning, firmware pre-configuration (channel plan, power limits, management IP), and branded packaging. OEM projects can have all Zukaka branding fully removed from the firmware for a pure white-label experience. Integration with third-party NMS/OSS via SNMP and REST API is also supported.
Q: What is the MOQ for OEM YNW 5-20ax?
Basic brand customization (logo + packaging) has a MOQ of 100 units. Deep firmware customization (UI skinning, pre-configured parameters) requires a MOQ of 200 units. Full ODM (including hardware/PCB revisions) requires a MOQ of 1,000+ units. Chassis color customization requires 500+ units. Volume pricing scales with quantity.
